Build an established painting kit to de-stress your next painting plan. A standard painting kit includes a drop cloth, paint thinner, patching paste, a multi-purpose paint gadget, painter’s tape, paintbrushes, paint rollers, a paint tray, an optional tray liner, paint primer, a putty knife, coveralls or old clothes, and finally, a paint can opener. It is a common thought, “Why bother invest in a paint gadget when I can employ a flathead screwdriver to open up up the lid?!” Eliminate wrecking your paint can cover and be able to produce an air-tight seal by not depending on a flathead screwdriver or a butter knife to open your paint can. This will destroy your leftover paint and reduce your investment.



Purchasing extra painter’s tape may perhaps save you another trip to the store. Buy some additional rollers and paintbrushes to help you accomplish stellar results in all areas. Painted ceilings and vaulted walls will demand an extension bar. The extension bar allows you to stand back from the wall which assists to prevent splatters from destroying your clothes and shoes. Deciding to put on coveralls or painting attire can remove the chances of wrecking your clothes.

Normally, a paint kit utilizes a roller tray or a paint tray. The paint trays work with reusable or disposable paint tray liners. Thoroughly clean the liners out afterward for easy reusability. Select a 5-gallon bucket using a screen grid to reduce excess paint from the paint roller.

A fundamental paint kit product is the multi-purpose paint tool. This is often used for applying putty or glaze, getting rid of caulking, cleaning paint roll covers, scraping paint, driving nails and even pulling nails. Lastly, don’t fail to remember your safety goggles, especially if you are painting overhead or utilizing spackle. No one wants nasty chemicals and paint in their eyes.

Paintbrush Selections

Choosing your paintbrushes diligently can save your whole project. Latex paint reacts well when used with nylon or synthetic-bristle paintbrushes. All-natural bristle brushes, on the other hand, are better for oil-based products including stains, varnishes and oils.

Not all paint roller covers are manufactured equally. Check for different naps and textures depending on the job. Rely on tighter naps for smooth surfaces, unless you prefer to apply a texture to the wall. Longer napped paint rollers are better for textured locations including stucco.



Try using a paint pot for cutting and reduced paint surfaces rather than relying on the entire paint can, which is often heavy to carry and hold. Dipping your paintbrush into a paint pot will reduce the potential for introducing contaminants and fuzz into your paint can. The paint pot comes with a wider layout compared to the original paint can and is lightweight in comparison. Dip part of the paintbrush bristles directly into the paint to “load” the paintbrush. Avoid dripping paint concerns by holding your paintbrush at an angle. As you administer paint, the friction from the wall will certainly draw paint from the paintbrush.

Enjoy Professional Results With These Painting Hacks

For maximum stir stick usage, drill some openings in it to help you thoroughly mix the paint. When you cut-in with a paintbrush and then use a roller for the remainder of the wall, “hat-banding,” may result. This occurs when you create a different consistency from the ceiling and the trim by not rolling close enough to the ceiling. However this is prevented if you use your paint roller to get as close to the cut-in areas as possible. To prevent a half-used paint can from drying out, simply put old golf balls inside to take up excessive air space.